Engineered Floor Herringbone 18/4x90x400mm, Unfinished, 4 Side Bevelled Edges, DIY Box, Classic Grade

The year 2020 will definitely be the year of herringbone parquet. More and more families and architects choose it because of its unique pattern design, and the precision it requires during the manufacturing process. Our multi layer 18mm thick herringbone parquet is available in 90mm width and 400mm length, which precisely fall in the category of traditional English wooden parquet dated hundreds years ago. The 4mm fine oak top layer can withstand up to 3 times sanding during its lifetime. Multi layer eucalyptus act as the supporting layer is to keep the floor stable over many decades of use. The top of this floor has been treated with 3 coats of UV oil, cured under high voltage Ultra violet light to give it the toughest surface, suitable for most domestic environment, or light commercial use under regular maintenance. Because the surface has been lightly brushed, so it also gives the floor good anti-slip effect, while preventing dirt trapped inside the groove as seen in many heavily brushed wooden floor. This herringbone parquet has traditional Tongue&Groove connection, allowing professional installer to fully secure the floor to the ground by adhesive or by high pressure nailer. Due to the unique pattern of herringbone parquet, the floorboard is divided evenly into side A and side B, or left and right. All our herringbone parquet is manufactured with clear A and B marking at back of each floorboard, to help installers to identify correct pieces, which in turn helps reducing waste and installation time.